Page 1 - T series spiral bevel gear units

T series spiral bevel gear units

The exact ratio of T series can be 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1.
Mounting position can be selected by clients.

Double input shaft.

Multiple output shaft.
T series can be used for speed increase and decrease when the ratio is not 1:1.

The spiral bevel gear can be forward reverse, transmission stability, quiet running, small vibration and large bearing capacity.

Sectional drawings:

1. Housing
2. X-shaft seat
3. X-shaft

4. Y-shaft
5. Spiral bevel gear
6. Spiral bevel gear
7. Cover

8. Cover
9. Bearing
10. Seal

11. Oil immersion lens

Direction of rotation:
One X-shaft Two X-shafts
Two extended shafts Three extended shafts Three extended shafts 4 extended shafts

Note: Direction of rotation of the output shaft varies with that of input shaft.

01
01