Danfoss Baifuma performer vortex SH 240 compressor performance in France: The compression of the Buffalo compressor is accomplished by two Buffalo compressor reels located in the upper part of the compressor, swirling above the motor. The inhaler enters the compressor through the suction port, the gas flows around the motor, and enters the motor through the bottom opening of the motor. The compressor oil is separated from the suction and dripped into the oil depot. All gases pass through the motor to ensure that the engine is completely cooled under all conditions. After the gas leaves the engine, it enters the reel. Compressor product application: R22, R407c and R134a are used in commercial and large commercial air conditioners as refrigerants. The product range includes single compressors for brazed joints, single compressors with nut angle lock valves and factory parallel compressors. Special accessory kits for dual, triple and quad parallel compressor installations are available.