How to solve the early pitting condition of reducer?

Reducer has certain use specifications in the ordinary use process, otherwise there will be certain problems, including pitting. Now we will introduce how to solve the early pitting condition of the reducer.

Reducer

I. Impact of Material and Processing Specifications

Correct selection of gear material, matching of load and hardness of heat treatment are also the reasons affecting early pitting.

II. Impact of Lubricants

Unreasonable lubrication of gear drive and improper selection of lubricants are also the reasons affecting early pitting. Ways to prevent early pitting of reducer gears:

(1) Reasonable lubrication of gear reducer drive and selection of suitable lubricant.

(2) Improve the installation accuracy of the reducer gears and ensure the contact accuracy of the gears.

For centre drive reducers, if not well investigated during assembly and installation, there may be asynchronism between left and right drives with poor load sharing effect. In this case, one side of the drive gear may not bear the load, while the other side of the drive gear is overloaded (zui is more than twice the design load), which can easily cause progressive early pitting on the tooth surface. For more information please consult.