Facebook
Twitter
Youtube
Pinterest

China WeiGao Transmission Machinery Co., Ltd.

wgt.asia@gmail.com

  • Home
  • About us
    • About us
    • Enterprise introduction
    • Quality Standard
    • Production Ability
    • Development path
    • Qualification honor
    • Technology Patent
    • Company Culture
    • After sales service
    • F.A.Q
  • Products
    • Product series on page 2
      • SMR Series Shaft Mounted Reducer
      • RXG Shaft Mounted Gear Reducer
      • JDX/MBY series gearbox
      • Wind turbine speed increaser
      • Dongchuan Motor Series
      • Couplings
    • Search Classes by Model
      • WH_WHCJ_CW_LCW_SCW_WD_WSJ_WXJ_A_M
      • WP_WPW_WPE
      • Replace_SEW_M_MC_Series Gearbox
      • XWD_BWY_JXJW_XLD_JXJL_BLY_BYY_XWED_BWEY
      • Gear_transfer_case_PUMP_DRIVE
      • Substitute for Russian gearbox products
    • R series helical gear units
    • S series helical worm gear units
    • K series helical bevel gear units
    • F series parallel shaft helical gear units
    • HB series industrial gear units
      • H2 series(iN1.8~22.4)(H204~H226)
      • H3 series(iN16~112)(H305~H326)
      • H4 series(iN71~400)(H407~H426)
      • B2 series(iN6.3~14)(B204~B218)
      • B3 series(iN16~90)(B304~B326)
      • B4 series(iN90~400)(B405~B426)
    • P Series Planetary gear reduction unit
      • 2-stage planetary gear transmission (search by model)
      • 3-stage planetary gear transmission (search by model)
    • WP series worm gearbox
      • WP Single Reducer Ratio(1/10-1/60)
      • WPW Universal Reducer Ratio(1/10-1/60)
      • WPE Double Reducer Ratio(1/100-1/3600)
    • NMRV series aluminum shell reducer
    • B/X Cycloid reducer(BLD,BWD,XLD,XWD)
    • ZQ JZQ SOFT TOOTH FACE GEAR BOX
    • ZSY/ZLY/ZDY/DBY Hardened tooth surface Gearbox
    • T series spiral bevel gear units
    • JWM/SWL series worm screw jacks
    • YHJ series hybrid gear reducer
    • AC Motor
      • CH/CV small reduction motor
    • MC/M/ML series industrial gearboxes
      • MC series industrial gearboxes
      • M series industrial gearboxes
      • ML series industrial gearboxes
    • Old website product data
  • News
    • Company news
    • Industry-news
  • Electronic Catalog
    • Electronic Catalog
    • 3D selection system
    • DOWNLOAD
  • Global case
  • Photo
    • Real picture display
    • Industry Application Cases
    • Ecological chain products
    • World famous products
  • 3D system
  • Contact us

Industry-news

Home News Industry-news Installation method of hard tooth helica...

Installation method of hard tooth helical gear RXF06-Y5.5-4P-1.86-M4-J3

Hard toothed helical gear RXF06-Y5.5-4P-1.86-M4-J3 is a commonly used industrial transmission equipment, and its installation method has a significant impact on the normal operation and service life of the equipment. When installing hard toothed helical gears, certain steps and precautions need to be followed to ensure the stability and reliability of the equipment.
1、 Preparation work
Before installing a hard toothed helical gear, sufficient preparation work needs to be done. Firstly, it is necessary to check whether the specifications and models of the hard tooth helical gear are consistent with the design requirements, as well as whether the tooth surface quality and rotation are flexible. Meanwhile, it is necessary to prepare the necessary installation tools and materials, such as screws, nuts, washers, etc.
2、 Basic production
Hard toothed helical gears need to be installed on a foundation, so foundation fabrication is an important step in the installation process. The foundation should have sufficient strength and stability to withstand the working load of hard toothed helical gears. When making the foundation, a suitable concrete foundation or steel structure foundation should be made according to the design requirements and the size of the hardened helical gear.
3、 Installation steps
1. Place the hard toothed helical gear on the foundation, adjust its position, and ensure that the gear centerline is aligned with the transmission axis.
2. Install fixing devices on both sides of the hard toothed helical gear, such as anchor bolts or fixing plates, and fix them on the foundation.
3. Check the installation position and angle of the hard toothed helical gear to ensure that it is parallel to the transmission axis and the angle is correct.
4. Use screws, nuts, and other tools to fix the hard toothed helical gear on the foundation, ensuring its stability and reliability.
5. After installation, conduct a trial run to check whether the hard toothed helical gear rotates flexibly and whether there is any abnormal noise or jamming.
4、 Precautions
During the installation process, attention should be paid to protecting the tooth surface of the hard toothed helical gear to avoid collisions, scratches, or impacts.
2. Ensure that the installation position and angle of the hard toothed helical gear are accurate to avoid affecting the transmission effect and service life of the equipment.
3. When fixing hard toothed helical gears, suitable fixing devices such as anchor bolts or fixing plates should be used to ensure their firmness and reliability.
During the trial operation, if any abnormal noise or jamming phenomenon is found in the hard toothed helical gear, it should be adjusted or repaired in a timely manner to avoid affecting the normal operation and service life of the equipment.
In summary, the installation method of the hard tooth helical gear RXF06-Y5.5-4P-1.86-M4-J3 needs to follow certain steps and precautions. During the installation process, attention should be paid to protecting the tooth surface, ensuring accurate installation position and angle, and using appropriate fixing devices. At the same time, if any problems are found during the trial operation, they should be adjusted or repaired in a timely manner. The correct installation method can ensure the normal operation and service life of hard toothed helical gears, and improve the stability and reliability of the equipment.

Related News

Lubrication, temperature rise control and safety precautions for BWD13-43-3KW cycloidal pinwheel reducer

Lubrication, temperature rise control and safety precautions

ZSY400-80-1 series cylindrical gear reducer gear box cast steel winch reducer

ZSY400-80-1 series cylindrical gear reducer gear box cast st

Hard tooth surface gearbox KA107-DV132S4-15.85 (5.5KW) reducer

Hard tooth surface gearbox KA107-DV132S4-15.85 (5.5KW) reduc

What are the common deformation conditions of the shaft system in NBD315-35.5 planetary reducers?

What are the common deformation conditions of the shaft syst

Working principle of NGW122-35.5 planetary gear reducer

Working principle of NGW122-35.5 planetary gear reducer

Here are the specific parameters of the ZDY400-4-5 gear reducer:

Here are the specific parameters of the ZDY400-4-5 gear redu

Product Categories

  • Product series on page 2
    • SMR Series Shaft Mounted Reducer
    • RXG Shaft Mounted Gear Reducer
    • JDX/MBY series gearbox
    • Wind turbine speed increaser
    • Dongchuan Motor Series
    • Couplings
  • Search Classes by Model
    • WH_WHCJ_CW_LCW_SCW_WD_WSJ_WXJ_A_M
    • WP_WPW_WPE
    • Replace_SEW_M_MC_Series Gearbox
    • XWD_BWY_JXJW_XLD_JXJL_BLY_BYY_XWED_BWEY
    • Gear_transfer_case_PUMP_DRIVE
    • Substitute for Russian gearbox products
  • R series helical gear units
  • S series helical worm gear units
  • K series helical bevel gear units
  • F series parallel shaft helical gear units
  • HB series industrial gear units
    • H2 series(iN1.8~22.4)(H204~H226)
    • H3 series(iN16~112)(H305~H326)
    • H4 series(iN71~400)(H407~H426)
    • B2 series(iN6.3~14)(B204~B218)
    • B3 series(iN16~90)(B304~B326)
    • B4 series(iN90~400)(B405~B426)
  • P Series Planetary gear reduction unit
    • 2-stage planetary gear transmission (search by model)
    • 3-stage planetary gear transmission (search by model)
  • WP series worm gearbox
    • WP Single Reducer Ratio(1/10-1/60)
    • WPW Universal Reducer Ratio(1/10-1/60)
    • WPE Double Reducer Ratio(1/100-1/3600)
  • NMRV series aluminum shell reducer
  • B/X Cycloid reducer(BLD,BWD,XLD,XWD)
  • ZQ JZQ SOFT TOOTH FACE GEAR BOX
  • ZSY/ZLY/ZDY/DBY Hardened tooth surface Gearbox
  • T series spiral bevel gear units
  • JWM/SWL series worm screw jacks
  • YHJ series hybrid gear reducer
  • AC Motor
    • CH/CV small reduction motor
  • MC/M/ML series industrial gearboxes
    • MC series industrial gearboxes
    • M series industrial gearboxes
    • ML series industrial gearboxes
  • Old website product data

Links

SCA ChinaWGT2WGT3WGT4WGT5WGT6

LatestPost

  • How to effectively reduce the oil pool t
    2025-08-15
  • What is the working principle of the R97
    2025-08-15
  • How to determine the service life of the
    2025-08-14

Contact Us

Facebook
Twitter
Google+
LinkedIn
Pinterest

Whatsapp: +8613456789605

Email:wgt.asia@gmail.com

Wechat:59201133

Fax:+8657185023568

Add: Aojiang Industrial Park, Wenzhou, Zhejiang, China

Mobile Website

Copyright © 2013-2025 Hangzhou WeiGao Transmission Machinery Co., Ltd. All Rights Reserved.

  • E-mail
  • Whatsapp
  • Inquiry
  • Skype.
Inquiry Us Now !
Inquiry Us Now !