How to maintain the hard tooth surface reducer regularly to increase the service life
The maintenance of hard tooth surface reducer is an important part of rational use of hard tooth surface reducer. It is necessary to replace repairs with a mandatory maintenance system for frequent unloading and repairs. Maintenance of hardened surface reducers is guided by prevention. The maintenance work of the hardened reducer is organized according to the length of the cycle and is regularly graded. Regular maintenance of hardened reducers is divided into two parts.
Applies to:
Level 1 Maintenance,
Level 2 Maintenance,
Level 3 Maintenance.
Primary maintenance Primary maintenance is the basis of technical maintenance at all levels, and technical management departments at all levels must attach great importance to the quality of primary maintenance work. Performed by professional maintenance personnel.
The main job content is cleaning, lubricating and fastening, and checking its operation, safety parts and lubricating oil level.
Secondary maintenance The secondary maintenance of the hardened gear reducer focuses on cleaning, inspection, adjustment and calibration. Performed by professional maintenance personnel. In addition to performing first-level maintenance work items, check the lubricating oil condition of moving parts, clean various filters, check the reliability of safety parts, eliminate hidden dangers, adjust the installation conditions of vulnerable parts, and the wear degree of rotating parts Calibration indicators use Instruments and control instruments to extend the service life and maintain the technical performance of the hardened gear reducer.
Level Three Maintenance The third level of maintenance focuses on disassembly for cleaning, inspection and adjustment. Remove gears as required, remove dust and coke, disassemble, clean and inspect parts, remove hidden hazards, remove defects, perform a full inspection of hardened gear reducers, perform rust removal, paint restoration and electrohardened teeth as required. Surface reducers are inspected and tested.
