Taikang Compressor TFH4524F France TECUMSEH fully enclosed piston compressor

Product Item：TFH4524F

FOB Reference price：Welcome to email to ask for price

Payment method：T/T

Port：NINGBO/SHANGHAI PORT

Category：

Description

Taikang compressors can tell you that the ambient temperature and high oil temperature have the following effects on the compressor:

1. If the temperature of the inhaled gas is too high, the amount of exhaust gas will be reduced;

2. The gas temperature is too high during the compression process, which will increase power consumption and reduce productivity;

3. If the temperature of the cylinder is too high, the gas will be burned and the lubricating oil in the piston ring will be coked, the lubrication will be lost, and the spark will be exposed to the danger of explosion. At the same time, the piston ring and the gas cutting, packing and other parts will work poorly and increase wear. , poor sealing;

4. If the temperature is too high, the bearing will be burned out, and the bearing bush can not continue to run;

5, other parts overheating will reduce mechanical strength or even deformation;

6. If the temperature of the lubricating oil is too high, it will reduce the viscosity of the oil and reduce the oil pressure to affect the lubrication efficiency;

7. If the temperature of the cooling water is too high, the cooling effect will be reduced;

8. If the temperature of the motor and internal combustion engine is too high, there will be danger of burning.

However, the temperature should not be too low. If the temperature of the cooling water is lower than 0 degrees, it will freeze and affect the circulation of the cooling water, and even freeze the machine. If the temperature of the lubricating oil is too low, the viscosity of the oil will increase and the lubrication will be hindered. If the temperature is too low, the internal combustion engine is not easy to start and so on. Therefore, we judge whether the compressor works normally from the temperature change, and control the temperature within the specified range to keep the equipment running normally. This is an important part that the compressor operator should master