Why does the worm gear reducer generate vibration?
Worm and worm reducers are also made of different materials. The bearing force and weight vary with the material of the reducer housing. The internal parts of the worm gear reducer are all metal castings, so they are relatively heavy. Especially the cast iron worm gear reducer made of cast iron is much heavier than the aluminum alloy worm gear reducer made of aluminum alloy.
Why is the shaft broken when the output of the reducer is too small
In addition to the gear reducer shaft broken due to poor concentricity of the gear reducer output end assembly, if the gear reducer output shaft is broken, the following reasons may be involved.
Precautions for reducer maintenance
Precautions for reducer maintenance 1. Oil level reducer is generally lubricated by oil teeth. Before use, oil must be added to the specified position (as shown in the diagram) and replaced regularly.
Analysis of vibration phenomenon of gear reducer
Through the spectrum analysis of the vibration phenomenon of the gear reducer, the foundation crack fault of the gear reducer body can be accurately judged, which can avoid the occurrence of equipment accidents and reduce the blindness of maintenance.
How to make the noise of reducer smaller
The problem of loud noise has always been an inevitable problem of many mechanical equipment. The formation of noise is caused by the operation of mechanical equipment, and it is inevitable. Therefore, noise has always been a "unsolvable" problem. However, although noise is inevitable, we can try our best to reduce it. Next, the reducer manufacturer will introduce it to you:
Selection method of reducer in different environments
There are several structural forms of the reducer, including open type, protective type, closed type and explosion-proof type. In order to better develop its functions in the environment, the following describes in detail the selection methods of the reducer in different environments: