Why does the gear reducer have a string of shafts?

People should pay attention to tuning shaft failure when using gear reducers, because this is a very serious problem. But why does the gear reducer have shaft string phenomenon? After reading the following content, everyone will know what causes it. The following is a specific analysis: The gear reducer is a driving force transmission mechanism. The key principle is to use the speed converter of the transmission gear to reduce the number of revolutions of the motor to the required number of revolutions to obtain greater torque. It can usually be divided into several types, namely gear reducer, worm gear reducer, planetary gear reducer and gear reducer composed of them. But if it turns out it has a series of axes, do you know what's causing it? What causes the gear reducer to have shaft string problems? 

First brother, it may be that the brakes are not very good, causing the gear reducer to have shaft string problems. 

Secondly, the broken teeth will cause the typing shaft to lose radial restraint, thus causing this phenomenon.

Third, it may be that the sealing between the driven transmission gear on the intermediate shaft and the shaft is not enough, that is to say, the clearance fit of the other parts is not enough, which is the key reason under normal circumstances. Left and right means today's highlights. 

If there are any questions that we cannot understand, we can leave a message on the message board of the People’s Official Website anytime and anywhere, and the People’s People will wholeheartedly answer your questions. The above are the specific reasons that may lead to the failure of the gear reducer series shaft. We can generally deal with them based on the above reasons.