What tools are needed to disassemble and clean the BW22-17 cycloidal pinwheel reducer

To disassemble and clean the BW22-17 cycloidal pinwheel reducer, you need to prepare these tools and follow the steps to operate more efficiently:
1、 Basic disassembly and assembly tools

Wrench set: Plum wrench, socket wrench (made of chrome vanadium steel material, suitable for bolt specifications)

Screwdriver: Cross/One letter head, for handling small screws

Rubber hammer: lightly tap on loose parts to avoid damage

Special tools: Cycloid wheel remover, file (for processing gear tooth grooves)

2、 Precision measuring and cleaning tools

Calipers/dial gauges: measure gear wear and bearing clearance

Compressed air gun: blow away internal oil stains

Nylon brush: clean tooth grooves and bearing raceways

3、 Safety and Protection

Protective equipment: solvent resistant gloves, goggles

Marking pen: Record the disassembly sequence

Attention: When disassembling, turn off the power first and mark the direction of the cycloid wheel; Check for seal wear after cleaning. Prioritize tool selection to adapt to the machine model and avoid hard prying.