How to Select the H Series Industrial Gearbox Type for Specific Applications
1. Clarify the core transmission parametersPower and torque: Determine input power and output torque based on the actual needs of the working machine. The power range of the H series is usually between 4 and 5000 kW, with a maximum torque of 900 kN · m.

Speed ratio and speed: The H series is a parallel axis helical gear transmission with 1-4 reduction stages, and the standard speed ratio range is between 1.25 and 450. If a larger speed ratio is required, it can be considered to be combined with the R and K series.
Usage factor (operating condition factor): This is the key to selection. Conventional constant load is taken as 1.2-1.5; If it is a working condition with high impact load and frequent start stop (such as metallurgy and mining), it should be taken as 1.5 or above.
2. Structural layout and installation method
Input/output mode: Optional motor connection flange or shaft input for input; Output options include solid shaft, hollow shaft (flat key/expansion disk/spline), or flange output.
Installation form: Depending on the site space, options include horizontal, vertical, torsion arm, or swinging base.
3. Verification of working environment and heat capacity
Box and heat dissipation: Cast iron box can be selected for small and medium power, and steel plate welded box is recommended for high power or strong vibration scenarios. Continuous 24-hour operation or high temperature environment requires a forced fan or heat dissipation enhancement type.
Thermal capacity verification: It is necessary to verify the thermal capacity power. If the actual required power exceeds the limit of natural cooling or fan cooling, a cooling coil type additional cooling oil tank should be selected.
Sealing and protection: For harsh working conditions such as high dust and humidity, IP54 or above protection level should be selected, and a labyrinth+double lip oil seal combination structure should be used.
4. Matching typical application scenarios
The H series is mainly aimed at heavy-duty, continuous operation industrial scenarios:
Metallurgy/mining/cement: such as ball mills, crushers, roller presses, etc., need to pay special attention to impact resistance and box rigidity.
Ports/power/chemical industries: such as large conveyors, mixing equipment, pumps, etc., need to pay attention to long-term stability and anti-corrosion sealing.