What should be paid attention to during the use of hard tooth surface gear reducers?
What should be paid attention to during the use of hard tooth surface gear reducers?
Three main reasons for the output of the gearbox to break
Introduction to the reducer manufacturer: Due to poor assembly concentricity at the output end of the reducer, the reducer shaft is broken. The wrong selection resulted in insufficient output of the equipped reducer. Some users mistakenly believe that as long as the rated output torque of the selected reducer meets the working requirements, it is sufficient. In fact, this is not the case. Firstly
Method of reducing gear noise of planetary reducer
Reducing the gear transmission noise during the operation of planetary reducers has become an important research topic in the industry. Many scholars at home and abroad regard the changes in gear tooth meshing stiffness in gear transmission as the main factors affecting the dynamic load, vibration, and noise of planetary reducers. By using the method of shape modification, the planetary decelerati
Reasons for non concentric shaft breakage of servo planetary reducer
Phenomena: The phenomenon of non concentric shaft breakage in servo planetary reducers refers to the phenomenon that when checking the cross-sectional area of the output shaft of the servo planetary reducer, it is found that the outer ring of the cross-sectional area is brighter, while the color of the cross-sectional area is darker towards the axis. Later, there are traces of breakage (dotted ma
Steps for Solving the Air Extraction Phenomenon with a Planetary Reducer
During the use of planetary reducer, different Glitch may occur due to improper operation and other reasons. The specific problem we need to solve today is about the air extraction phenomenon that occurs during the use of planetary reducers. The occurrence of this phenomenon is not a major problem, so planetary gearbox users do not need to panic. If it occurs, we should solve it in a timely manner
How to deal with the noise problem of planetary reducers
How to deal with the noise problem of planetary reducers
Introduction to the problems and solutions encountered in the use of planetary reducers
Introduction to the problems and solutions encountered in the use of planetary reducers
Introduction to the function of planetary reducer bearings
A reducer is a working transmission mechanism that needs to transmit torque to the shaft and bearings. In a planetary reducer, the bearings can serve as a support between the rotation of the gear shaft or connecting rod. Therefore, the transmission efficiency and quality of the reducer are directly related to the bearings, and the sliding quality and lifespan of the bearings will affect the overal