What materials are needed for B3SH9-50-90KW high-power gearbox

Here are some materials that may be used when installing and maintaining B3SH9-50-90KW high-power gearboxes:

1. Lubricating oil: Select suitable lubricating oil according to the working requirements of the gearbox, such as industrial gear oil with high viscosity index, good wear resistance, and oxidation resistance. Common brands include Shell, Mobil, etc.

2. Seals: including various specifications of oil seals, O-rings, sealing gaskets, etc., used to prevent lubricating oil leakage inside the gearbox. If damaged seals are found during maintenance, they need to be replaced in a timely manner.

3. Gears and bearings: As key components of the gearbox, when the gears experience wear, tooth surface peeling, or other damages, or when the bearings experience increased clearance or ball wear, new gears and bearings need to be replaced.

4. Bolts and nuts: During installation and maintenance, there may be situations where bolts and nuts are damaged or lost. It is necessary to prepare some spare bolts and nuts, whose specifications should be consistent with the original bolts and nuts on the gearbox.

5. Cleaning agent: Used to clean the oil stains, impurities, etc. inside the gearbox. Special industrial cleaning agents can be selected, or organic solvents such as gasoline and kerosene can be used, but safety should be taken into account when using them.

6. Lubricating grease: Used to lubricate some rolling bearings, sliding bearings and other parts inside the gearbox, lithium based grease, molybdenum disulfide grease, etc. can be selected.

7. Rust inhibitor: When the gearbox is not in use or stored for a long time, rust inhibitor can be applied to its surface to prevent rusting of components.