Planetary cycloidal pinwheel reducer BLD4-29-11KW reducer with small input shaft volume

BL reducer usually refers to a vertically installed cycloidal pinwheel reducer.

Working principle: Similar to the BWD gearbox, the reduction is achieved through the meshing of cycloidal pin teeth according to the principle of planetary transmission with few tooth differences.

Installation form: Vertical installation, corresponding to the horizontal BWD reducer.

Performance characteristics:

High reduction ratio and efficiency: The first stage transmission reduction ratio is 9-87, the two-stage transmission reduction ratio is 121-5133, and the multi-stage combination can reach tens of thousands. And the needle tooth meshing system has sleeve type rolling friction, with no relative sliding on the meshing surface, and the first stage deceleration efficiency reaches 94%.

Smooth operation and low noise: During operation, there are multiple pairs of teeth that come into contact simultaneously, resulting in a high degree of overlap and smooth operation. It has strong overload capacity, low vibration and noise, and various specifications of models have low noise.

Reliable use, long lifespan, low friction coefficient, no relative sliding in the meshing area, minimal wear, and durability.

Compact structure and small volume: Compared with other reducers of the same power, the weight and volume are more than one-third smaller. Due to the planetary transmission, the input shaft and output shaft are on the same axis, which can achieve the smallest possible size.