News

The coaxiality error between the motor shaft and the input shaft of ZSY315-63-3 reducer should usually be controlled within the range of radial deviation not exceeding 0.05mm and axial deviation not exceeding 0.05mm/m. Generally speaking, a dial gauge can be used for measurement. The dial gauge is fixed on the motor or gearbox, and the gauge head touches the circumferential surface of the conne

When installing ZSY450-90-III reducer (a large hard tooth surface cylindrical commonly used in high torque and high-power transmission scenarios), strictly ensuring the levelness of the motor and reducer is the core prerequisite for ensuring the long-term stable, efficient, and safe operation of the entire transmission system. Its essence is to avoid a series of chain failures caused by "non desi

The material selection for the output shaft of BWE1815-23 * 17 cycloidal pinwheel reducer is usually as follows: 45 steel: This is a commonly used medium carbon quenched and tempered structural steel with high strength and good machinability. The output shaft is treated with 45 steel quenching and tempering, with a hardness generally ranging from 187-229HBW, which can meet the requirements of g

To improve the efficiency of BWE31-1003-0.75KW cycloidal pinwheel reducer, the selection of output shaft material should comprehensively consider strength, wear resistance, and processing technology. The following are optimization suggestions: 1. High precision and low friction material (recommended) 20CrMnTi carburizing steel: After carburizing and quenching, the surface hardness reaches HRC5

When installing ZSY450-90-III reducer (a large hard tooth surface commonly used in high torque and high-power transmission scenarios), strictly ensuring the levelness of the motor and reducer is the core prerequisite for ensuring the long-term stable, efficient, and safe operation of the entire transmission system. Its essence is to avoid a series of chain failures caused by "non design forces" b

When installing ZSY400-25-I reducer (large hard tooth surface cylindrical gear reducer, suitable for high-power motors), ensuring the levelness of the motor and reducer is the core prerequisite for ensuring stable operation of the transmission system, controlling coaxiality, and extending the life of components. The adjustment of levelness should follow the principle of "benchmark first, followed

The WPDX50-60-0.12KW worm gear reducer, as a small and specific speed ratio transmission equipment, is designed with its performance characteristics closely centered around the core requirements of "low power, large reduction ratio, and high adaptability", as follows: 1、 Core transmission characteristics: precise deceleration suitable for low-power scenarios Single stage large reduction ratio,

The WPDX60-60-370W worm gear reducer has the characteristics of compact structure, large reduction ratio, and smooth transmission, and is suitable for various scenarios that require deceleration and torque increase. The following are some common application scenarios: Automated production line: In an automated production line, this reducer can be used to achieve precise position control and pow