Industry-news

To determine whether the sealing structure of ZQA1000-40-7CA soft tooth surface reducer needs to be replaced, the following aspects can be taken into account: Check for leaks: Observe appearance: Regularly check whether there are traces of lubricating oil leakage in the outer shell, shaft end, flange connection and other parts of the reducer. If oil stains, droplets, or sludge are found to a

To determine whether the sealing structure of ZQA650-31.5-3CA reducer needs to be replaced, the following steps can be followed: 1. Appearance inspection: Check the reducer housing, shaft extension, flange connection, and other parts for oil stains, oil droplets, or sludge accumulation. If it exists, it indicates that there may be lubricating oil leakage and there may be problems with the seali

When replacing the DCY710-31.5-1S hard tooth reducer case, the following precautions should be taken: 1. Preparation work: Check the installation environment: Ensure that the installation site is dry, clean, well ventilated, and the temperature is within a reasonable range of -40 ℃ to 50 ℃. At the same time, the installation foundation should be stable and have sufficient bearing capacity.

When replacing the gearbox housing with a hard tooth surface, the following measures can be taken to ensure the cleanliness of the equipment: Preparation before replacement Cleaning work area: Clean the installation site thoroughly, remove debris, dust, etc., keep the environment clean, and prevent these impurities from entering the reducer during the replacement process. Prepare cleaning t

Hard tooth surface KAF67-Y2.2-4P-57.28-M6-A-270 ° gear reducer is suitable for the following fields: 1. Lifting machinery: such as cranes, electric hoists, etc. Among these devices, the gearbox can reliably transmit power and perform operations such as lifting, lowering, and horizontal movement of heavy objects due to its high strength and load-bearing capacity on its hard tooth surface. It can

Here are some methods to prevent abnormal heating of GKAF87-12.4-AD4-8 gear reducer: 1. Correct selection and use: Based on the actual workload, speed and other requirements, choose a suitable specification of reducer to ensure that it can meet the work requirements and avoid overload operation. Strictly follow the product manual to ensure the normal operation of components such as couplings an

Here are some methods to solve the problem of poor gear meshing in ZLY224-9-I hard tooth surface gear reducer: 1. Adjust installation accuracy: Check the concentricity of the shaft system: Use a dial gauge to measure the radial runout of the gear shaft, ensuring that the concentricity between each shaft is within the specified range. If it exceeds the tolerance, the installation position of

The sealing structure of ZQA350-15.75-2 cylindrical gear reducer has the following impact on the service life of the equipment: Protecting internal components and extending service life: Effective sealing can prevent lubricant leakage and pollutant invasion, protect key components such as gears and bearings from wear and corrosion, extend their service life, reduce the frequency of maintenance