News

Excessive or insufficient backlash between the cycloidal gear teeth of the BWD27-23-4KW reducer can disrupt the normal meshing state, leading to unstable transmission and increased component wear, directly affecting the operational accuracy, load-bearing capacity, and service life of the reducer. 1、 The impact of excessive tooth flank clearance The transmission accuracy decreases, causing the

To ensure the long-term stability of the concentricity between the output shaft and load shaft of NRV030-60SZB8 reducer, the core is to start from the installation foundation, connection method, fixing process, and maintenance monitoring, forming a full process guarantee. 1. Strengthen the stability of the installation foundation The foundation should be made of cast iron, thick steel plate or

To determine whether the concentricity between the output shaft and load shaft of the NMRVO90F1-2.2KW reducer meets the standard, the core is to use the "radial deviation+angular deviation" dual index detection, combined with operational status verification, and finally compare it with industry standards for judgment. 1. Clearly define the standards for compliance (core basis) Radial deviation

The detection of abnormal meshing of worm gear and worm gear in WPWA70-30-B reducer requires a comprehensive analysis of the following methods, combined with quantitative indicators and operational status: 1、 Mesh clearance detection 1. Centimeter measurement method Place the contact of the dial gauge against the tooth surface or end surface of the worm gear, fix the worm gear and rotate the

To repair the abnormal meshing of the worm gear in the WPWA80-15-A reducer, it is necessary to first identify the cause of the abnormality through testing (such as assembly deviation, tooth surface wear, lubrication failure, etc.), and then take targeted repair measures. The core is to restore the meshing accuracy, contact state, and transmission stability. The specific methods are as follows: 1、

PWU160-35.5-I worm gear reducer is a common reduction transmission device. The following is an introduction to its advantages and disadvantages: advantage Large reduction ratio and compact structure: PWU160-35.5-I worm gear reducer can achieve a single-stage reduction ratio of 35.5, which can meet large reduction ratio requirements with a simple structure. Meanwhile, its compact structure, s

The correct installation and maintenance of PWU180 worm gear reducer requires ensuring "installation accuracy, proper lubrication, suitable working conditions, and regular inspections". The specific operations are as follows: 1、 Correct installation process 1. Preparation before installation Check the appearance of the reducer, confirm that the housing, worm gear, and worm wheel are not damag

The following are some common cases of abnormal noise in worm gear reducers, and the principles of these cases also apply to the WHS180-50-2 model reducer: Poor lubrication leads to abnormal noise: The gearbox of a certain food processing enterprise produces abnormal noise after running for a period of time. After inspection, it was found that the amount of lubricating oil was insufficient, the