To determine whether the vibration of the ZJY212-16-22KW shaft mounted reducer is abnormal, the following aspects can be taken into account: Reference vibration standard: According to the Chinese national standard GB10068-2008 "Measurement and Evaluation of Mechanical Vibration Velocity and Acceleration", the standard value of the vibration velocity of the reducer is 0.45mm/s, and the standard
In addition to the measures mentioned above to improve the working environment, the performance of gear reducers can also be improved through optimizing design, improving manufacturing and assembly accuracy, and improving lubrication, as follows: Optimize gear design Choose the appropriate tooth profile: In addition to the common involute tooth profile, the involute tooth profile or circular
In addition to setting overload protection devices, ZHQ350-48.4-I reducers can also be protected through reasonable selection, regular maintenance, and optimized operating conditions, as follows: Reasonable selection and installation Correct selection: Based on the actual working load, speed, transmission ratio, and other requirements, choose a suitable specification of reducer to ensure tha
Compared with involute gears, circular arc gears are usually more suitable for high-speed transmission, mainly based on the advantages of transmission efficiency and smoothness brought by their tooth profile characteristics, as follows: Higher transmission efficiency: The tooth profile of the circular arc gear is a circular arc curve, and the meshing is in line contact. Compared with the point
The DBY180-28-3 reducer has the following differences between the two heat treatment processes of carburizing, quenching, and nitriding: Different infiltration elements: Carburizing and quenching: infiltrating carbon elements into the surface layer of steel to form a high carbon surface layer, generally with a carbon content of 0.8% -1.2%. After quenching and low-temperature tempering, the s
The lubrication system of XWED53-1605-2.2KW cycloidal pinwheel reducer usually consists of the following parts: Oil tank: used to store lubricating oil, provide oil source for the lubrication system, and also play a role in settling impurities and dissipating heat. Oil pump: It is the power source of the lubrication system, which extracts lubricating oil from the oil tank, pressurizes it, an
The installation steps for the two-stage XWED42-187-0.55KW cycloidal pinwheel reducer are as follows: Preparation before installation Check the equipment: Confirm whether the reducer and motor are intact, and check whether the dimensions and fitting tolerances of the motor positioning boss, input shaft, and reducer connection parts match. Cleaning parts: Clean the anti rust oil at the conne
To determine whether the sealing structure of ZQA1000-40-7CA soft tooth surface reducer needs to be replaced, the following aspects can be taken into account: Check for leaks: Observe appearance: Regularly check whether there are traces of lubricating oil leakage in the outer shell, shaft end, flange connection and other parts of the reducer. If oil stains, droplets, or sludge are found to a
