News

The impact of the sealing structure of ZQA250-31.5-1 soft tooth surface reducer on the performance of the equipment is as follows: Preventing lubricant leakage and ensuring lubrication effect: A good sealing structure can prevent lubricant leakage in the gearbox, keeping components such as gears and bearings in good lubrication condition, reducing friction coefficient, minimizing energy loss, a

The sealing structure of ZQA350-15.75-2 cylindrical gear reducer has the following impact on the service life of the equipment: Protecting internal components and extending service life: Effective sealing can prevent lubricant leakage and pollutant invasion, protect key components such as gears and bearings from wear and corrosion, extend their service life, reduce the frequency of maintenance

Here are some tools that can be used to check for loose screws in the ZDY500-1.4-2 hard tooth reducer: Torque wrench: This is a commonly used tool for checking loose screws. Select a torque wrench with an appropriate range based on the specifications and torque requirements of the gearbox screws. When using, set the torque wrench to the specified torque value of the screw, and then use it to tu

Loose screws of ZDY450-4-III hard tooth reducer can cause the following problems: Regarding mechanical malfunctions Part displacement and damage: Loose screws inside the reducer can cause the connected parts to lose their stable fixation, resulting in displacement during the operation of the reducer. For example, the displacement of important transmission components such as gears and shafts

To determine whether the vibration of the gearbox body of FAF37-0.55KW-56.4 is caused by poor alignment, the following aspects can be taken into account: Vibration characteristic analysis Frequency characteristics: Poor alignment usually causes the second harmonic vibration component of the rotor, and the more severe the misalignment, the greater the proportion of the second harmonic compone

The vibration of the gearbox body of FAF57-0.75KW-90.26-M6 has the following effects on the equipment: Component damage: Vibration can subject key components such as gears, bearings, and shafts inside the gearbox to alternating stress and impact loads, accelerating fatigue damage, exacerbating wear, and even leading to fracture. For example, gear tooth surfaces may experience pitting and peelin

When debugging the load of BWY22-43-3KW cycloidal pinwheel reducer, the lubrication condition can be checked by the following methods: Check the quality of lubricating oil: Observe color and clarity: Cut off the power, wait for the gearbox to cool down, and then open the oil drain bolt to obtain an oil sample. Normal lubricating oil has a uniform color, clear and transparent. If the oil samp

The main reasons for poor lubrication during load debugging of BWY11-11-1.1KW cycloidal pinwheel reducer are as follows: Lubricating oil related issues Improper selection: Failure to select appropriate lubricating oil based on the working load, friction form, and operating environment of the reducer. For example, if a low-speed heavy-duty gear does not use lubricating oil with good wear resi